TC VBF
TC VBF INTRODUCTION
TC-VFB is the equipment that can identify problems caused by variable geometry mechanisms without dismantling turbocharger.
TC-VFB prevents problems caused by variable geometry mechanisms after remanufacturing / repairing turbochargers by precision adjustment ability.
ROLL OTOMOTÄ°V is official international distributor of TC VFB.
TC VFB is the first flow bench in the market which calibrates the actuator by measuring only the flow. With this -the most accurate method- the actuator’s minimum flow position and actuator’s length can be calibrated in 1 step. Moreover, the software with 3d animations helps the operator to calibrate the actuator easily.
This flow bench is the result of our R&D studies with TUBITAK (The scientific and technological research council of Turkey),which have been developped for 4 years. Before it is commercially available worldwide, TC VFB has been tested for years and approved its accuracy and quality.
TC VFB Turbocharger Vane Flow Bench is a variable geometry mechanism testing and calibrating bench. TC VFB applies a pressurized airflow to the turbine housing of the turbocharger which commands the movement of the actuator.
Air Supply
An external source of compressed air is required. 1.500 l/min@10 bar air compressor, 500 l air tank is recommended.
Overall Dimensions
Width : 1400 mm Depth : 700 mm Heigth : 1300 mm Weight : 170 kg (Approx.)
Electrical Supply
220/230v – 50Hz – 10A (Single phase)
Turbocharger Connection
Connection adapters are made by kestamid (polyamid) material. The design and used material allows the operator to connect the turbocharger very quickly. Fixing the turbocharger to the bench takes less than 30 seconds.
Testing
TC VFB is the only bench in the market which calibrates the actuator by measuring air flow at 3 different position of actuator. This unique system indicates vane failures, allows precise calibration and eliminates technician faults.
Computer
A 15’’ Touch screen, SSD hard drive, Windows 7 installed computer sets the new standards. The computer can be connected directly to your workshop’s network. You can transfer all data to your computer or print the data or do whatever you normally do with your laptop.
Software
Another stunning feature of the TC VFB is software. With the touch screen interface, you can easily operate TC VFB, with easy to perform tests and 3d animations direct operators to finalize the calibration operation in a short time. Comparison screens help the operator to perform the correct calibration.
The software also offers the oppurtunity to create and save the reference data of the new turbochargers.
Online Update Software allows users to download new turbochargers’ reference data from web.
PLEASE CONTACT US FOR QUOTATION